Home News Racelogic announce new Indoor Positioning system

Racelogic announce new Indoor Positioning system

Industrial hall under construction with constuction machinery inside

US: Racelogic is launching a brand-new Indoor Positioning System, called VIPS, which is an advanced system for measuring real-time 3D position to an accuracy of ±2cm in areas where GPS is not available, making it an ideal tool for construction applications both indoors and in urban areas.

Racelogic will be presenting this cutting-edge technology at the upcoming London Build Show in Olympia on the 27th and 28th November with live demonstrations and the opportunity for construction engineers, integrators and technical partners to explore just how effective VIPS could be when applied to real-world problems.
The system has been designed for any application that requires accurate measurement and recording of 3D positioning and enables GPS based technologies to operate in GPS denied environments.

Discussions are already underway with construction partners to implement VIPS for applications including Indoor/Outdoor Surveys, Snagging, AR, Machine Control, Crane Safety, Depth Measurement and Automated Guided Vehicles. However, the flexibility of VIPS and the option for bespoke adaptation means there are no limits to the potential applications of this cutting-edge technology. VIPS consists of Fixed Ultra-Wideband (UWB) beacons which are placed around the perimeter of the operation area (e.g. floor plan of building or construction site), in known positions which have been manually surveyed using a handheld laser, Total Station or, if time is of the essence, a self-survey can also be performed. The beacons are completely stand-alone and can be battery-powered, making the deployment very rapid.

A fixed or hand-held receiver continuously communicates with the beacons and triangulates its position. This data is combined with the measurements from a highly accurate inertial measurement system, providing a real-time 3D position to within 2cm. The data can be viewed live on a Racelogic VBOX Touch and coordinate locations can be saved to an SD card so that they can be efficiently revisited at a later time. The position and speed also output over an RS232 link, WiFi, Bluetooth or onto a CAN bus, allowing easy connection to third party equipment.