Meteodata processing of METOP and FengYun satellites using ScanMagic LL 1.9.5

Meteodata processing of METOP and FengYun satellites using ScanMagic LL 1.9.5

SHARE

Moscow, Russia, 26 June 2006: ScanEx R&D Center declared the issue of the new version of ScanMagic LL 1.9.5 software capable of processing the meteodata delivered from the METOP and FengYun satellites. The new version of ScanMagic LL 1.9.5 is the light version of the basic ScanMagic software application.

ScanMagic LL 1.9.5 software is supplied together with the new small-size universal station, created on the basis of the Alice-SC ground station for the reception of meteodata from three operators: NOAA (USA), METOP (Europe) and FengYun (China). Earlier the Alice-SC used to support data reception and processing only from the NOAA series in HRPT mode (High Resolution Picture Transmission) using ScanMagic LL software.

The application enables to import the following data types:

  • SCANEX NOAA APT – NOAA APT data of Level 0, created by the reception station;
  • SCANEX NOAA HRPT/RAW – NOAA HRPT data of Level 0, created by the reception station;
  • SCANEX NOAA HRPT/DUF2 – NOAA HRPT data of Level 0 of form of fragments, cropped within the previously used ScanViewer software;
  • SCANEX FengYun CHRPT – FengYun CHRPT data of Level 0, created by the reception station;
  • NOAA L1B – radiometrically calibrated HRPT products of Level 1B from NOAA and METOP satellites in widely used exchange format (format sub-versions: NOAA-KLM L1B, NOAA-N L1B, AAPP L1B).